首先上板子的照片
 
板子正面可以看到，前端的小板是STLINK的芯片是F103。有了它就可以省去下載線，用安卓手機的數據線就可以調試和下載程序，非常方便。目前我也在做一個STM32相關的設計，也想把這個加進去。然后來看主板部分，中間一個主芯片地方是排母，按鍵，mircousb，LDO阻容等，外設網口空著沒有焊接。排母周圍的絲印標這個這些IO的功能，比較方便去找相應的位置。
 
我們?cè)賮?lái)看看后面，這次的排座是長插針形式的，就是后面還可以當插針用，直接插杜邦線，上面是排母，下面是針的形式也是比較貼心的，這樣你可以做個轉接板插在上面，也可以插在下面，也可以直接用線在下面引出去，開發調試的時候還是挺方便的。還有就是這次的板子支撐是四個角的跳線帽，雖然覺得有點簡單，但是感覺應該還是用用處的，在板子接外面的電路時候，地往往都要用很多，這個跳線帽的網絡就是地，一舉兩得。

然后在看看開發板配套的資源吧，由于本人水平有限，可能理解的不夠透徹，還請各位高手多包涵哈！

先把基本的手冊傳上來讓大家一起看看吧，包括芯片的datasheet，參考手冊，編程手冊，開發板的手冊，原理圖，gerber，BOM，還有一個以前一直沒怎么注意，才發現的一個非常厲害的工具，在用的就忽略這段吧。那就是stm32cubemx這個軟件。
看看它的介紹：
STM32CubeMX is a graphical tool for 32-bit ARM? Cortex? STM32 microcontrollers. It is part of STMCube? initiative (see Section 1) and is available either as a standalone application or as an Eclipse plug-in for integration in Integrated Development Environments (IDEs).
STM32CubeMX has the following key features:
· Easy microcontroller selection covering whole STM32 portfolio.
· Board selection from a list of STMicroelectronics boards.
· Easy microcontroller configuration (pins, clock tree, peripherals, middleware) and
generation of the corresponding initialization C code.
· Easy switching to another microcontroller belonging to the same series by
importing a previously-saved configuration to a new MCU project.
· Generation of configuration reports.
· Generation of IDE ready projects for a selection of integrated development
environment tool chains. STM32CubeMX projects include the generated initialization C
code, STM32 HAL drivers, the middleware stacks required for the user configuration,
and all the relevant files needed to open and build the project in the selected IDE.
· Power consumption calculation for a user-defined application sequence.
· Self-updates allowing the user to keep the STM32CubeMX up-to-date.
· Download and update of STM32Cube? embedded software required for user
application development (see Appendix E: STM32Cube embedded software packages
for details on STM32Cube embedded software offer).
Although STM32CubeMX offers a user interface and generates a C code compliant with STM32 MCU design and firmware solutions, it is recommended to refer to the product technical documentation for details on actual implementation of microcontroller peripherals and firmware.