# =============== Elasticsearch Configuration =================
#
# NOTE: Elasticsearch comes with reasonable defaults for most settings.
# ? ? ? Before you set out to tweak and tune the configuration, make sure you
# ? ? ? understand what are you trying to accomplish and the consequences.
#
# The primary way of configuring a node is via this file. This template lists
# the most important settings you may want to configure for a production cluster.
#
# Please consult the documentation for further information on configuration options:
# https://www./guide/en/elasticsearch/reference/index.html
#
# ---------------------------------- Cluster -----------------------------------
#
# Use a descriptive name for your cluster:
# 集群名稱，默認是elasticsearch，必須修改
#cluster.name: my-application
#
# ------------------------------------ Node ------------------------------------
#
# Use a descriptive name for the node:
# 節點名稱，必須修改
#node.name: node-1
#
# Add custom attributes to the node:
#
#node.attr.rack: r1
#
# ----------------------------------- Paths ------------------------------------
#
# Path to directory where to store the data (separate multiple locations by comma):
# 可以指定es的數據存儲目錄，默認存儲在es_home/data目錄下，強烈建議修改
#path.data: /home/es/elasticsearch/data
#
# Path to log files:
# 可以指定es的日志存儲目錄，默認存儲在es_home/logs目錄下，強烈建議修改
#path.logs: /home/es/elasticsearch/logs
#
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
# 鎖定物理內存地址，防止elasticsearch內存被交換出去,也就是避免es使用swap交換分區
#bootstrap.memory_lock: true
#
#
# 確保ES_HEAP_SIZE參數設置為系統可用內存的一半左右
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
#
# 當系統進行內存交換的時候，es的性能很差
# Elasticsearch performs poorly when the system is swapping the memory.
#
# ---------------------------------- Network -----------------------------------
#
# Set the bind address to a specific IP (IPv4 or IPv6):
#
# 為es設置ip綁定，默認是127.0.0.1，也就是默認只能通過127.0.0.1 或者localhost才能訪問
# 一旦自定義設置了 network.host ，Elasticsearch 會假定你正在從開發模式轉移到生產模式，并將許多系統啟動檢查從警告升級到異常
#network.host: 192.168.75.206
#
# Set a custom port for HTTP:
#
# 為es設置自定義端口，默認是9200
# 注意：在同一個服務器中啟動多個es節點的話，默認監聽的端口號會自動加1：例如：9200，9201，9202...
#http.port: 9200
#
# For more information, consult the network module documentation.
#
# --------------------------------- Discovery ----------------------------------
#
# Pass an initial list of hosts to perform discovery when this node is started:
# The default list of hosts is ["127.0.0.1", "[::1]"]
# 當啟動新節點時，通過這個ip列表進行節點發現，組建集群
# 注意：如果是發現其他服務器中的es服務，可以不指定端口[默認9300]，如果是發現同一個服務器中的es服務，就需要指定端口了。
#discovery.seed_hosts: ["192.168.75.206"]
#
# Bootstrap the cluster using an initial set of master-eligible nodes:
# 初始化時的master節點
#cluster.initial_master_nodes: ["192.168.75.206"]
#
# For more information, consult the discovery and cluster formation module documentation.
#
# ---------------------------------- Gateway -----------------------------------
#
# Block initial recovery after a full cluster restart until N nodes are started:
# 一個集群中的N個節點啟動后,才允許進行數據恢復處理，默認是1
#gateway.recover_after_nodes: 3
#
# For more information, consult the gateway module documentation.
#
# ---------------------------------- Various -----------------------------------
# 設置是否可以通過正則或者_(dá)all刪除或者關閉索引庫，默認true表示必須需要顯式指定索引庫名稱
# 生產環境建議設置為true，刪除索引庫的時候必須顯式指定，否則可能會誤刪索引庫中的索引庫。
# Require explicit names when deleting indices:
#
#action.destructive_requires_name: true
#
#只有head節點需要配置，其他非head節點不要配置，不然建不起集群
#http.cors.enabled: true
#http.cors.allow-origin: "*"